Shinybow USA SB-6335R4 Instruction Manual Download Page 3

Page: 3 / 12

CONTENTS

TABLE OF CONTENTS ....................................................1
FEATURES & SPECIFICATIONS ..................................... 2
PACKAGE CONTENTS .................................................. 2
TYPICAL HOOKUP & OPERATION ................................ 3
IR EXTENDER ................................................................ 4
RACK MOUNT ............................................................... 6

INTRODUCTION

Congratulations on your purchase of one of the most innovative
HDMI over HDBaseT™ with Ethernet Receiver on the market
today. The HDBaseT™ Receiver can receive the HDMI, IR in,
IR remote out, RS-232 in, RS-232 out and Ethernet signals from
HDBaseT™ Transmitter via a single category cable for long
distance maximum 328 feet (100M). SB-6335R4 use single
category LAN cable CAT6, CAT6a or CAT7 (UTP or FTP) with RJ-

45 8P8C connector and support 568a or 568b color specification

table. This HDBaseT™ receiver product provide the higher
full HD HDMI resolutions 480i/p, 720p,1080i/p quality that are
identical to the source to the HD destination display. Control and
receive signals are useful the HDMI digital Video, digital multi-
channel audio signals, IR in, IR out, Bi-directional RS-232 series
interface in or out and Ethernet series interface control via single
category cable from the HDBaseT™ Transmitter.

HDMI-HDBaseT ™ EXTENDER Series

Thank you for purchasing the SB-6335R4 HDMI-HDBaseT™ with Ethernet Receiver. You will find this unit easy to install
and highly reliable but it is essential that you read this manual thoroughly before attempting to use HDBaseT™ Extender.

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this

equipment:
• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts
inside the unit.

• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.

We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update
or to keep current the information contained in this document.

We reserve the right to make improvements to this document
and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated

into any language or computer file, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise — without express written permission and consent

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.

CONFORMANCE TEST REPORT

FOR

EN 61000-6-1 / EN 61000-6-3

REPORT NUMBER: 09-07-MAS-282-18-R

FOR

FCC 47 CFR/Part 15 Subpart B