Before making any connections to the switcher. Observe the following:
> Ensure the mains voltage supply matches the label on the supplied plug-
Pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a common point.
> Avoid powering equipment within a system from multiple power sources
that may be separated by large distances
REMOTE CONTROL
REMOTE CONTROL
> Connect all audio video sources and destination equipment
> power up all source and destination audio-visual sources
> For each destination output select the appropriate input source by using
> Upon power up the switcher will return to its last used setting before
The front panel input 1~8 select buttons. The supplied IR remote control.
Or through the RS 232 serial communications port.
Powered down.
PAGE 20
SB-5688 INSTRUCTION & OPERATION MANUAL
POWER
1
2
3
4
5
6
7
8
ON
OFF
MEMORY
DESTINATION
SOURCES
RECALL
1
2
3
4
5
6
7
8
ENTER
LOCK
EDID
ALL
OFF
8x8 HDMI MATRIX SWITCHER
ENIRPA5688000A2
SW-5688
SWITCH POWER ON or OFF
1
Controller with a separate power ON and OFF
DESTINATION : 1 thru 8 OUTPUT SELECTION
Press the destination button to select the output
display channel.
2
3
FUNCTION KEY
ALL
OFF
EDID
RECALL
MEMORY
ENTER
LOCK
5
SOURCE : 1 thru 8 INPUT SOURCE SELECTION
Press input 1~8 sources with selection button
4
3
4
5
2
1
IR REMOTE : SW-5688
IR REMOTE CONTROL KEY :
- function selection button
- function selection button
- function selection button
- function selection button
- function selection button
- function selection button
- function selection button
