LEARNING EDID #2
Passing EDID From Destination To Source
Multiple Learning mode #2 EDID setup
Press
EDID > OFF > DESTINATION #1 THRU #8 > ENTER
The EDID for HDMI has been Learned from the Destination port to the Source port.
1. Press
EDID
button. The LCM will show the current EDID status.
2. Press
OFF
button. The LCM will show the current EDID LEARN status.
3. Press
DESTINATION (1-8)
button. The switcher will LEARN the destination HDMI
EDID and pass to the selected source. Switcher will Enable or Disable HDMI EDID
for the selected source.
4. Press
ENTER
to confirm changes. The LCM will return to the default screen
showing selected matrix routing status.
NOTE: When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and
the EDID data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination
to source or Disable the LEARNING
15
EDID FUNCTION