FRONT PANEL- ARC
FRONT PANEL
9. FUNCTION KEY - ARC
Audio Return Channel (ARC) is a feature that sends audio from the TV back down the HDMI cable to its source device, in this case, the
switcher, Not all displays support ARC; check your Users Guide for additional information. ( Default = ARC Disabled )
The “Audio & ARC” port can support audio from either of three sources.
If the Input Video/Audio Source is HDMI, the audio can extracted from the embedded signal.
If the Input Audio Source is connected to the external Audio Input, this same audio will be present on the Audio & ARC jack.
If ARC is selected, the audio will be from the destination device (ex; TV).
To Enable the ARC option on a specifi c Output, perform the follow steps:
- Press the
ARC
button.
- On the
Destination
row, Press 1 thru 8 (the button will illuminate).
- Press
ENTER
button. The new confi guration will be stored The front panel LCD display will now show an “ A “ under the Output port.
- Or press
ARC
again to cancel operation.
To Disable the ARC option on a specifi c Output, perform the follow steps:
- Press the
ARC
button.
- On the
Destination
row, press 1 thru 8 (the button will illuminate).
- Press
ENTER
The pre-set confi guration will execute. The front panel LCD display will be blank under the Output port.
- Or press
ARC
again to cancel operation.
Note :
1. Operation will abort if no keys are pressed within 5 seconds.
2. The AUX Audio input only function when a valid HDMI / DVI video signal is present. Without a video, the AUX audio will not
operate.
6
