TABLE OF CONTENTS
1
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of
fi
re,
electrical shock and injury to persons.
• To prevent
fi
re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow
for suf
fi
cient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT
NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer
fi
le, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without express written permission and consent
© Copyright 1997. All Rights Reserved.
Version 1.4 JULY 2014
TRADEMARK
ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
CONTENTS
INTRODUCTION & CONTENTS ....................................... 1
FEATURES & SPECIFICATIONS ...................................... 2
FRONT PANEL .................................................................. 3
REAR PANEL .................................................................... 6
REMOTE CONTROL ........................................................7
RS-232 SERIAL INTERFACE ...........................................9
EDID FUNCTIONS ..........................................................10
TYPICAL APPLICATION ...............................................13
R EXTENDER .................................................................15
LIMITED WARRANTY ....................................................17
INTRODUCTION
The SB-5685 is professional 8x5 matrix routing switch. Supporting
eight (8) HDMI Inputs. Output supported (5) HDMI and (1) Preview
output (same output-01). The SB-5685 is based on the HDMI
standard and supports full resolution HDMI Video with embedded
EDID. With a signal bandwidth of 340Mhz, there is no signal
degradation. High De
fi
nition Digital signals can be selected and
distributed to any (8) Inputs to (5) outputs simultaneously. The
Switcher is certi
fi
ed as being fully CEC and HDCP 2.0 compliant,
full HD HDMI V1.4a 3D formats, data rates up to 6.75 Gbps.
Supports UXGA/WUXGA/DVI 1920x1200 resolution to any
HD displays. The Switcher is certi
fi
ed as being fully HDMI and
HDCP compliant, with RoHS,CE,FCC certi
fi
cation. Support high
resolution HDMI sources routed to HDMI displays, monitors,
projector or audio receivers. The EDID management can be
selected between eight (7) different modes. Control is provided
via Front panel push buttons, IR remote, RS-232 or TCP/IP (not a
web-browser). An RS-232 Windows GUI interface is provided for
matrix routing control (Windows only).
PACKAGE CONTENTS
Check that you have the following components;
• SB-5685LCM Matrix Routing Switcher
• RS-232 V2.0 Protocol Instructions
• Ethernet V2.0 Protocol Instructions
• Master wireless IR Remote Control (SW-5685)
• 19 inch Ear mount bracket (Part # 1U-440L)
• SB-100 IR Extender distance ~984 feet (300M) Receiver set
• SB-100C IR Extender distance 6ft(2M) Receiver Cable.
• CD Contents : This manual, Windows GUI, ISP V1.0
Windows driver
• RS-232 Cable 6 feet (2M)
• ISO Screws
• Users Guide
• Worldwide Universal Power Supply: DC12V, 5A,
• Input:(100~230 VAC, AC 50/60Hz.)