EDID FUNCTION
Mode 5 . H36-3D-M (1080p-36 bits)
Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby D 7.1CH, DTS-HD 7.1CH
Mode 6 . 4K2K (24/30Hz)
HDMI Support : 4K2K-3D, PCM 2CH (3860x2160-24/30Hz)
Audio Support: PCM 2CH
Mode 7 . 1920x1200-60Hz (DVI-D)
DVI Support : DVI-D 1920 x 1200 60Hz
Mode 8 . AUTO <Default>
All Outputs will be set to the highest common resolution of all connected
display devices.
LEARNING EDID
Learning EDID from Destination to Source
Learning EDID Setup
Press
EDID > DESTINATION > SOURCE > ENTER
Press
EDID > DESTINATION
Button: The LCM will be show LEARNING.
Switcher will
LEARN
destination HDMI EDID and pass the selected source.
Learning EDID setup for HDMI:
Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned
Press
EDID > DESTINATION > DESTINATION >
SOURCE > ENTER
Switcher will
LEARN
destination HDBaseT CATx EDID and pass the
selected source.
Learning EDID setup for HDBaseT CATx:
Key Press Sequence:
EDID > DESTINATION # > DESTINATION # > SOURCE # > ENTER
Again, Press the same DESTINATION # to learn HDBaseT CATx EDID
The EDID for HDBaseT CATx has been learned
NOTE : The already learned EDID cannot be modifi ed. You can only rebuild a new Learning EDID.
For example: When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the
EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when you
want to remove the learning EDID memory from EPROM.
22