BACK PANEL
BACK PANEL
7
1. DC POWER INLET:
The switcher is fi tted with a DC power plug input connector.
Ensure that the used is of an approved type and is of suffi cient
current carrying connector capacity with the correct voltage and
connector polarity. Power supply 100V~240VAC, 50/60Hz.
2. IR EXTENDER CONTROL:
Support one of IR Extender Extend distance maximum 300m
/ ~1000 ft. When you plug the external IR extender into the
switcher, the front panel IR receiver remains active.
3. RS-232 CONNECTION:
RS-232 control port to allow for interfacing to a PC, such as a
computer or touch panel control, to the switcher via this DB-9pin
female connector for serial RS-232 control.
4. ETHERNET CONNECTION:
Connect a CAT6/6a/7 category cable to the Ethernet port for
control of the switcher from a computer.
5. HDMI INPUTS 1 ~ 16:
Connect a signal link of HDMI direct digital video/audio to this
female HDMI connector, which supports HDMI digital video/audio
and DVI digital video sources.
HDMI Digital Video/Audio, Connector with fi x screw
Input 1 ~ Input 16
6. HDMI OUTPUTS 1 ~ 16:
Connect a signal link of HDMI direct digital video/audio to this
female HDMI connector, which supports HDMI digital video/audio
and DVI digital video sources.
HDMI Digital Video/Audio, Connector with fi x screw
Output 1 ~ Output 16
Power Jack:
DC Jack - Inner OD Ø 2.1 mm (+)
Outside OD Ø 5.5mm (GND)
Power input -100V~240VAC,50/60Hz
IR Extender Jack:
Female Jack - inner OD Ø 3.5mm
Remote port:
DB-9pin Female connector
8P8C / RJ 45 connector
HDMI digital video/audio connector:
HDMI Female connector.
Note: With proper adapters, the switcher can
be used with DVI digital video signals, HDCP
compliant.
HDMI digital video/audio connector:
HDMI Female connector.
Note: With proper adapters, the switcher can
be used with DVI digital video signals, HDCP
compliant.