5
FRONT PANEL
FRONT PANEL
1
POWER SWITCH
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power
2
SOURCE DEVICE STATUS DISPLAY
Source 1 to LED illuminates blue to indicate that a video source is present on that input.
3
SOURCE DEVICE STATUS DISPLAY
Channel 1-8 show by LED display.
4
IR SENSOR
The IR sensor receives IR commands from the supplied remote controller.
5
19 INCH EAR MOUNT PAIR
19 inch (1 RU) rack mount brackets
CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar with the signal input-output, Power requirements plus any controls present.
Before using the distributor, please take the time to make certain that the device you wish to connect to its inputs is functioning properly
in all respects. Verify that the video and audio signals are present and are being displayed properly on a suitable device.
If all is well connect the appropriate cables between the output of the device you wish to distribute to output(s) of the distributor to the
carious devices you wish to feed a signal to. Lastly, connect the AC to DC adaptor, connect the DC connector to the distributor
fi
rst and
then plug the adaptor into a functional AC outlet.