CONTENTS
INTRODUCTION & CONTENTS ......................................1
FEATURES & INSTALLING DIAGRAM ........................... 2
SPECIFICATIONS ............................................................ 3
FRONT/REAR PANEL I/O INSTRUCTION ...................... 3
INTRODUCTION
The SB-565xU2 is professional 1x2, 1x4, or 1x8 Distribution
Amplifier designed to split (1) HDMI source to (2), (4), or (8) 4K
UHD displays. HDCP 2.2 compliant, these units support up to
Ultra HD 4K at 30/50/60Hz (2160p), 1080p, 3D, supporting 4:4:4
YUV color space with HDR and 4K/60Hz. With super bandwidth
of 18Gbps, these splitters can be used typically with displays
and projectors supporting the latest HDMI 2.0 and HDCP 2.2 for
ultimate reproduction of the video signal without any loss and
attenuation. Supports HDMI 2.0 /1.4 and HDCP 2.2/1.4, Dolby
Atmos, DTS: X, DTS-HD Master Audio, PCM7.1, Dolby TrueHD.
Resolution up to 4K@60Hz (4:4:4) 8bit with manual EDID to
choose the resolution you need.
PACKAGE CONTENTS
Check that you have the following components:
•
SB-565xU2 Distribution Amplifier
• HDMI Locking Post Replacement Screws
• Users Guide
•
Power Supply: DC12V, 1A, (Worldwide Universal
100~240VAC, AC 50/60Hz)
1
HDMI-4K2K@60Hz Distribution Amplifier Series
Thank you for purchasing the SB-5652U2/SB-5654U2/SB-5658U2 HDMI Distribution Amplifier. You will find this unit easy
to install and highly reliable but it is essential that you read this manual thoroughly before attempting to use these HDMI
4K2K@60Hz Distribution Amplifiers.
TABLE OF CONTENTS
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update
or to keep current the information contained in this document.
We reserve the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise — without express written permission and consent.
© Copyright 2017. All Rights Reserved.
Version 1.0 DEC 2017
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
IMPORTANT WARRANTY INFORMATION.
If you remove the HDMI screw posts, you must
use the provided HDMI Locking Post replacement
screws to keep the internal HDMI jack secure.
Removing the HDMI screws without installing the
HDMI Locking Post replacement screws will void
your warranty.
LOOK A PUPPY!! NOW READ THIS!!