REMOTE CONTROL
Before making any connections to the SB-5645LCM. Observe the following:
> Ensure the mains voltage supply matches the label on the
supplied plug- Pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a
common point.
> Avoid powering equipment within a system from multiple
power sources that may be separated by large distances
> Connect all audio video sources and destination equipment
> Power up all source and destination audio-visual sources
> For each destination output select the appropriate input source
by using the front panel input 1~8 select buttons. The
supplied IR remote control. Or through the RS-232 serial
communications port.
> Upon power up the switcher will return to its last used setting
before Powered down.
REMOTE CONTROL
1. & 2. SWITCH POWER ON or OFF:
Controller with a power ON and OFF
3. DESTINATION : 1 thru 4 OUTPUT SELECTION:
Press the destination button to select the output display channel.
4. SOURCE : 1 thru 4 INPUT SOURCE SELECTION:
Press input 1~4 sources with selection button
5. FUNCTION KEY:
ALL - function selection button
DEMO or ENTER - function selection button
EDID - function selection button
LOCK - function selection button
6. SELECT EDID MODES : press source button 1 thru 2
1. Mode 1 : FSS (Fast Speed Start)
2. Mode 2 : H24-3D
3. Mode 3 : H24M-3D
4. Mode 4 : H36
5. Mode 5 : H36M
6. Mode 6 : H36-3D
7. Mode 7 : H36M-3D
8. Mode 8 : AUTO
8