![Shinybow USA SB-5645CAK Instruction Manual Download Page 12](http://html1.mh-extra.com/html/shinybow-usa/sb-5645cak/sb-5645cak_instruction-manual_1258481012.webp)
10
BACK PANEL
BACK PANEL
1. DC POWER INLET:
The switcher is fitted with a DC power plug input
connector. Ensure that the plug used is of an approved type and
is of sufficient current carrying connector capacity with the correct
voltage and connector polarity. 100~240Volt AC, 50/60Hz power
supply.
2. IR EXTENDER CONTROL:
Supports one IR extender. Extends a
maximum distance ~1000 feet/300M. When you plug the external
IR extender into the switcher, the front panel IR receiver remains
active.
3. RS-232 CONNECTION:
RS-232 control port allows for interfacing to
a PC, such as a computer or touch panel control, to the switcher
via the DB-9pin female connector for serial RS-232 control.
4. ETHERNET CONNECTION:
ETHERNET control port allows for TCP/IP
interfacing to a PC, such as a computer or touch panel control (not
a web-browser), to the switcher via the RJ-45 female connector to
control the switcher.
POWER SOCKET:
Connector Type: IEC 60320 C13
IR EXTENDER JACK:
Female Jack - inner OD Ø
3.5mm
This port also supports F/W updates.
REMOTE PORT:
D-SUB-9pin female connector
REMOTE PORT:
Control the switcher via RJ-45
female connector
ETHERNET PORT:
Note: The Ethernet port and RS-232 port
cannot be used simultaneously. Any
connection to the Ethernet port will disable
serial commands sent to the RS-232 port.