PAGE 5
SB-5644 INSTRUCTION & OPERATION MANUAL
1
REAR PANEL
REAR PANEL
1
2
INPUTS-1~4 COMPONENT-DIGITAL-AUDIO
3
Input 1~ 4 port source signals :
- Component Video(YP
B
P
R
), 3x RCA Connectors
- Digital Audio (PCM), 1x RCA Connector
- Stereo Audio(AR/AL), 2x RCA Connectors
RS 232 CONNECTION
RS 232 control port to allow for interfacing to a
PC, Such as a computer or touch panel control,
to the SB-5644 switcher via this DB-9pin
Female connector for serial RS-232 control.
DC POWER INLET
The SB-5644 is fitted with a DC power plug-park
input connector. Please ensure that the plug-park
used is of an approved type and is of sufficient
current carrying capacity with the correct voltage
and connector polarity. 12Volt DC power supply
1.25A Max.
OUTPUTS-1~ 4 COMPONENT-DIGITAL-AUDIO
4
Remote port :
DB-9pin Female connector
Component Video (YP
B
P
R
) Via 3x RCAs
Digital Audio(PCM) Via 1x RCA connector
Stereo Audio(AR/AL) Via 2x RCA connectors
Connect a signal source of Component Video(YP
B
P
R
)/
digital Audio(PCM)/Stereo Audio devise to 4x4 switcher.
Note:
With 6x RCA female connectors.
Connect a signal of Component Video(YP
B
P
R
),digital video &
audio direct to Female RCA connector. This connector supports
component video, digital video & audio to HDTV display device.
Power Jack:
DC Jack - inner OD O 2.1mm (+ )
Outside OD O 5.5mm (GND)
Power input - 12VDC, 1.25A
CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar with the signal input-output, Power requirements plus
any controls present.
Before using the SB-5644, please take the time to make certain that the device you wish to connect to its inputs
is functioning properly in all respects. Verify that the video and audio signals are present and are being displayed
properly on a suitable device.
If all is well connect the appropriate cables between the output of the device you wish to distribute to output(s)
of the SB-5644 to the carious devices you wish to feed a signal to. Lastly, connect the AC to DC adaptor,
connect the DC connector to the SB-5644 first and then plug the adaptor into a functional AC outlet.
2
INPUT 1
INPUT 1
Y/G
Pb/B
Pr/R
Digital
R/V
L/H
Component Video (YP
B
P
R
) Via 3x RCAs
Digital Audio(PCM) Via 1x RCA connector
Stereo Audio(AR/AL) Via 2x RCA connectors
Note:
With 6x RCA female connectors.
OUTPUT 1
OUTPUT 1
Y/G
Pb/B
Pr/R
Digital
R/V
L/H
Output 1~ 4 display port signals :
- Component Video(YP
B
P
R
), 3x RCA Connectors
- Digital Audio (PCM), 1x RCA Connector
- Stereo Audio(AR/AL), 2x RCA Connectors
RoHS/95/EC
INPUT 1
INPUT 1
OUTPUT 4
OUTPUT 4
RS-232
INPUT 2
INPUT 2
INPUT 3
INPUT 3
INPUT 4
INPUT 4
OUTPUT 3
OUTPUT 3
OUTPUT 2
OUTPUT 2
OUTPUT 1
OUTPUT 1
4x4 MATRIX SWITCHER
COMPONENT VIDEO YPbPr(RGB)
R/V
L/H
Coaxial
Y/G
Pb/B
Pr/R
R/V
L/H
Coaxial
Y/G
Pb/B
Pr/R
R/V
L/H
Coaxial
Y/G
Pb/B
Pr/R
R/V
L/H
Coaxial
Y/G
Pb/B
Pr/R
R/V
L/H
Coaxial
Y/G
Pb/B
Pr/R
R/V
L/H
Coaxial
Y/G
Pb/B
Pr/R
R/V
L/H
Coaxial
Y/G
Pb/B
Pr/R
R/V
L/H
Coaxial
Y/G
Pb/B
Pr/R
STEREO AUDIO AR/AL(VD/HD)
COAXIAL (PCM)
DC 12V
INPUT
4
3