7
BACK PANEL
BACK PANEL
1. DC POWER INLET:
The Switcher is fitted with a DC power plug input
connector. Ensure that the used is of an approved type and is
of sufficient current carrying connector capacity with the correct
voltage and connector polarity. 12Volt DC power supply 3A Max
(Center pin positive).
2. IR EXTENDER CONTROL:
Support one of IR Extender Extend
distance maximum 300 Meters / ~1000 feet. When you plug the
External IR extender into the switcher, the front panel IR receiver
remain active.
3. RS-232 CONNECTION:
RS-232 control port to allow for interfacing
to a PC Such as a computer or touch panel control, to the switcher
via this DB-9pin Female connector for serial RS-232 control.
4. INPUTS - 1, 2, 3 & 4 HDMI:
Connect a signal link of HDMI direct
digital video/audio to this Female HDMI connector. This connector
supports HDMI digital video/audio and DVI digital video sources.
HDMI Digital Video/Audio, Connector with fix screw
Input 1 ~ Input 4
5. OUTPUTS - 1 & 2 HDMI:
Connect a signal link of HDMI direct digital
video/audio to this Female HDMI connector. This connector
supports HDMI digital video/audio and DVI digital video sources.
HDMI Digital Video/Audio, Connector with fix screw
Output 1 ~ Output 2
Power Jack:
DC Jack - Inner OD ᴓ 2.1mm (+ )
Outside OD ᴓ 5.5mm (GND)
Power input - 12VDC, 3A
IR Extender Jack:
Female Jack - inner OD O 3.5 mm
Remote port :
DB-9pin Female connector
HDMI digital video/audio connector:
HDMI Female connector.
Note: With the proper adapters, the
switcher can be used with DVI digital
video signals HDCP compliant. DVI does
not support audio.
HDMI digital video/audio connector:
HDMI Female connector.
Note: With the proper adapters, the
switcher can be used with DVI digital video
signals HDCP compliant.