
INTRODUCTION
INTRODUCTION
The SB-5610 is the high quality HDMI ARC Control Box with HDMI Audio Extractor. Audio are ARC, DVD Source SPDIF and Analog
stereo, This control Box can link audio (ARC or Source SPDIF) to TV or Audio Amplifier and turn ON or turn OFF the TV or Audio Amplifier
speaker. The Audio Extractor support HDMI Repeater and Equalizer between HDMI player and display. SB-5610 supports HDMI 1.3a,
1.3c(CTS), HDCP 2.0 and DVI 1.0 compliant HDMI 1.4a, 3D formats. Audio support PCM 2-channel IIS/DSD, SPDIF and HDMI outputs,
Video support 36 bit Deep Color up to 1080p-60 (225 Mhz). This device allows you to extract analog audio LPCM2 and digital audio
SPDIF from the HDMI signal while still sending the original audio video signal to your HD devices. When using a display without speakers
you can still extract the analog audio to external speakers or digital audio to an Amplifier.
Before you make any connections
Make sure the HD Player connected to the HDTV HDMI ARC Control Box is functioning properly before connecting them to the unit.
Always connect the HDMI extend to the HDMI Display via a HDMI cable one at a time and make sure each works just as it did before it
was connected.
Supplied Accessories
Check that you have the following components in your converter pack;
(1) 1 Instruction Manual
(2) 1 SB- 5610 console
(3) 1 AC Adaptor : 12VDC, @1A~1.25A
Safety Notice!
To prevent damage to your television equipment use only the supplied
AC Adaptor and make the power connections to your television
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONAL.
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
This symbol is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operational
and maintenance (serving) instructions in the literature accompanying the
appliance.
To prevent electric shock do not use this (polarized) plug with an extension cord,
receptacle or other outlet unless the blades can be fully inserted to prevent blade
exposure. To prevent electric shock, match wide blade of plug to wide slot, fully
insert.
3