10
RS-232 PROTOCOL COMMANDS ( RS-232 Control driver V2.0.1 )
The ShinybowUSA switcher can be controlled via the RS-232 serial control port
to allow for interfacing to a PC, or similar third party control system.
The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop
bit - this is often referred to as 9600 8N1. When the unit recognizes a complete
command it will perform the requested action - there is no delimiter character
required.
RS-232 SERIAL CONNECT
Pin RS-232
Definition
1
------
Not used
2
TX
Transmitter
3
RX
Receiver
4
------
Not used
5
GND
Ground
6
------
Not used
7
------
Not used
8
------
Not used
9
------
Not used
RS-232 SERIAL INTERFACE