7
REMOTE CONTROL
Before making any connections to the SB-5548BNC. Observe the following:
• Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%).
• Ensure that the power switch is OFF.
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
• Connect all audio video sources and destination equipment.
• Power up all source and destination audio-visual sources.
• For each destination output select the appropriate input source by using The front panel input 1-8 select buttons. The supplied IR remote
control. Or through the RS-232 serial communications port.
• Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
IR REMOTE CONTROL KEY :
IR
REMOTE
:
SW-5548BNC
IR
PCB
:
RA-02
1. & 2. SWITCH POWER ON or OFF:
Controller with a power ON and OFF
3. DESTINATION : 1 thru 8 OUTPUT SELECTION:
Press the destination button to select the output display channel.
4. SOURCE : 1 thru 8 INPUT SOURCE SELECTION:
Press input 1~8 sources with selection button
5. AUDIO VOLUME / BALANCE KEY:
Adjust Audio
Volume
from +0 ~ +100 levels.
Adjust Audio
Balance
from L=+0 ~ +50 levels.
Adjust Audio
Balance
from R=+50 ~ +100 levels.
6. FUNCTION KEY:
ALL - function selection button
OFF - function selection button
VOL/BAL - function selection button
RECALL - function selection button
ENTER - function selection button
MEMORY - function selection button
LOCK - function selection button