Shinybow USA SB-5460 Instruction Manual Download Page 3

1

SAFETY PRECAUTIONS 

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting 

the power supply. Please keep the following in mind as you unpack and install this equipment:

•   Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.

•  To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.

•   Never spill liquid of any kind on or into this product.

•   Never push an object of any kind into this product through any openings or empty slots in the unit, as you may 

damage parts inside the unit.

•  Do not attach the power supply cabling to building surfaces.

•  Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.

•  Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk 

on it.

•  To protect the unit from overheating, do not block any vents or openings in the unit housing that provide 

ventilation and allow for sufficient space for air to circulate around the unit. 

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. We assume no 

responsibility for any infringements of patents or other rights of third parties which may result from its use.

We assume no responsibility for any inaccuracies that may be contained in this document. We make no 

commitment to update or to keep current the information contained in this document.

We reserve the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of 

its part translated into any language or computer file, in any form or by any means — electronic, mechanical, 

magnetic, optical, chemical, manual, or otherwise — without the express written permission and consent.

© Copyright 2020. All Rights Reserved.

Version 2.4 APR 2020

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they 

are associated.

www.shinybowusa.com

122 Rose Ln. Suite 303    |     Frisco, Texas 75036
[email protected]

Summary of Contents for SB-5460









Reviews: