Shinybow USA SB-5430 Instruction Manual Download Page 3

CONFORMANCE TEST REPORT

 FOR 

EN 55013 / EN 55020

EN 55013 / EN 55020

                       REPORT NUMBER: ET93S-09-213-01

 FOR 

FCC 47 CFR/Part 15 Subpart B

FCC 47 CFR/Part 15 Subpart B

                    Report Number: ET93S-09-213-02

Model Number: SB-5430

Comment Number :
SB-3680, SB-3681, SB-3682, SB-5430, SB-5440, S8·5450,
S8·5460, S8·5470

Input: Audio/Video system (Composite or S-Video)
          Stereo Audio system (R/L)
Output: Audio/Video system (Composite or S-Video)
            Stereo Audio system (R/L)
Power Input: +DC12V, @ 300mA

TABLE OF CONTENTS

SAFETY PRECAUTIONS 

Please read all instructions before attempting to unpack, install or 
operate this equipment and before connecting the power supply. 
Please keep the following in mind as you unpack and install this 
equipment:

•   Always follow basic safety precautions to reduce the risk of fi re, 

electrical shock and injury to persons.

•  To prevent fi re or shock hazard, do not expose the unit to rain, 

moisture or install this product near water.

•   Never spill liquid of any kind on or into this product.

•   Never push an object of any kind into this product through any 

openings or empty slots in the unit, as you may damage parts 
inside the unit.

•  Do not attach the power supply cabling to building surfaces.

•  Use only the supplied power supply unit (PSU). Do not use the 

PSU if it is damaged.

•  Do not allow anything to rest on the power cabling or allow any 

weight to be placed upon it or any person walk on it.

•  To protect the unit from overheating, do not block any vents or 

openings in the unit housing that provide ventilation and allow 
for suffi cient space for air to circulate around the unit. 

DISCLAIMERS

The information in this manual has been carefully checked and 
is believed to be accurate. We assume no responsibility for any 
infringements of patents or other rights of third parties which may 
result from its use.

We assume no responsibility for any inaccuracies that may be 
contained in this document. We make no commitment to update or 
to keep current the information contained in this document.

We reserve the right to make improvements to this document and/
or product at any time and without notice.

COPYRIGHT

 

NOTICE

No part of this document may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or any of its part translated 
into any language or computer fi le, in any form or by any means 
— electronic, mechanical, magnetic, optical, chemical, manual, or 
otherwise — without express written permission and consent

© Copyright 1997. All Rights Reserved.

Version 1.2 SEPT 2013

TRADEMARK

 

ACKNOWLEDGMENTS

All products or service names mentioned in this document may 
be trademarks of the companies with which they are associated.

CONTENTS 

I

NTRODUCTION ...............................................................1

FEATURES & SPECIFICATIONS ....................................2

TYPICAL HOOK-UP & OPERATION  ................................3

LIMITED WARRANTY ......................................................4

INTRODUCTION

Congratulations on your purchase of one of the most innovative 
Video/Audio switching products on the market today. This Routing 
Switcher is controlled by an IR Remote Controller and has 4 
individual Composite Video or S-Video(Y/C)/Stereo Audio (R/L) 
inputs with 2 identical Composite/S-Video/Audio outputs. It is 
useful for routing signals from Composite/S-Video/Audio Source 
devices (such as: VCRs, Camcorders, Video Game Consoles, 
Video CD players, DVD players, Satellite Receivers, CAT5 Set Top 
Boxes, etc.) to Composite/S-Video/Audio destination devices(such 
as :VCRs, DVD recorders, TV Sets, Video Projectors, etc.)

This device can be operated in two modes: IR Remote control or 
Manual mode. It can be selected by pushing the IR key/Manual 
button on the front panel to the Video switcher. If you have four 
devices hooked up to the four inputs and only one has its power 
turned on, only that device can be switched to the output by IR 
Remote control. When Manual mode is selected, same can be 
done by pushing the Video select buttons on the front panel.

PACKAGE CONTENTS

Check that you have the following components;

•  SB-5430 Routing Switcher  
• Users Guide 
•  AC/DC Adapter: 12VDC, @ 300mA

AC/DC Adaptor Types : CE/UL/SAA/BS

1

Reviews: