CONFORMANCE TEST REPORT
FOR
EN 61000-6-1 / EN 61000-6-3
EN 61000-6-1 / EN 61000-6-3
REPORT NUMBER: ET94S-06-090-01
FOR
FCC 47 CFR/Part 15 Subpart B
FCC 47 CFR/Part 15 Subpart B
Report Number: ET94S-06-090-02
Model Number: SB-5420
Comment Number :
SB-5420R, SB-5420F, SB-5420G, SB-5425
Input: 4x Composite Video, RCA connectors
Stereo Audio (AR/AL), RCA connectors
Output: 2x Composite Video, RCA connectors
Stereo Audio (AR/AL), RCA connectors
Power Input: +DC12V, @300mA~500mA
TABLE OF CONTENTS
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow
for suffi cient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT
NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer fi le, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without express written permission and consent
© Copyright 1997. All Rights Reserved.
Version 1.2 SEPT 2013
TRADEMARK
ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
CONTENTS
I
NTRODUCTION ...............................................................1
FEATURES & SPECIFICATIONS ....................................2
TYPICAL HOOK-UP & OPERATION ................................3
LIMITED WARRANTY ......................................................4
INTRODUCTION
Each has 4 individual AV inputs with 2 identical AV outputs and
is useful for routing signals from AV source devices (such as:
VCRs, Camcorders, Game Consoles, Video CDs, DVD’s, Satellite
Receivers, CAT5 Set Top Boxes, etc.) to AV destination devices
(such as: VCRs, DVD-Rs, TV Sets, Video Projectors, etc.). This
avoids the need for constantly moving cables around. In addition
to the innovative Auto mode, the Auto Switchers can operate in a
Manual mode for switching.
This device can be operated in two modes: Auto or Manual. In
the Auto mode, selected by pushing the Auto/Manual button on
the front panel to the DOWN position, the Auto AV Switcher will
automatically pick up the input that has a signal present. So, if you
have four devices hooked up to the four inputs and only one has
its power turned on, that device will automatically be switched to
the output. If more than one device has power turned on, the one
with the higher number (AV1, AV2, AV3 or AV4) will be switched to
the output. This enables the unit to operate without an additional
IR Remote Control unit by turning power on and off to the source
devices. When in the Manual mode, selected by pushing the Auto/
Manual button on the front panel to the UP position, selection of
input AV1, AV2, AV3 or AV4 to be routed to the AV output in done
by repeatedly pressing the Input Channel button to toggle through
the inputs.
PACKAGE CONTENTS
Check that you have the following components;
• SB-5420 Routing Switcher
• Users Guide
• AC/DC Adapter: 12VDC, @ 300mA
AC/DC Adaptor Types : CE/UL/SAA/BS
1