1
AV IN
8:4 VGA SWITCHER
SW-4184
2
3
4
MONITOR OUT
MONITOR OUT
AV-1
AV-2
AV-3
AV-4
AV-5
AV-6
AV-7
AV-8
POWER
ON
OFF
00/07
0AF5 0BF4 0CF3 0DF2
01FE 05FA
02FD 06F9
03FC 07F8
04FB 08F7
00/06
PAGE 6
SB-4184 INSTRUCTION & OPERATION MANUAL
Before making any connections to the
. Observe the following:
SB-4184
> Ensure the mains voltage supply matches the label on the supplied plug-
Pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a common point.
> Avoid powering equipment within a system from multiple power sources
that may be separated by large distance
REMOTE CONTROL
REMOTE CONTROL
> Connect all audio video sources and destination equipment
> power up all source and destination audio-visual sources
> For each destination output select the appropriate input source by using
> Upon power up the switcher will return to its last used setting before
The front panel input 1~4 select buttons. The supplied IR remote control.
Or through the RS 232 serial communications port.
Powered down.
1
SWITCH POWER ON or OFF
1
Controller with a separate power ON and OFF
SELECTION 1~4 OUTPUTS TO MONITOR
3
SELECTION INPUT 1~ 8 SOURCES
Output - : Switch 4x VGA sources to # 1 Monitor Display
1
CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar with the signal input-output, Power requirements plus any controls
present.
Before using the switcher, please take the time to make certain that the device you wish to connect to its inputs is functioning
properly in all respects. Verify that the video and audio signals are present and are being displayed properly on a suitable device.
If all is well connect the appropriate cables between the output of the device you wish to distribute to output(s) of the switcher to
the carious devices you wish to feed a signal to. Lastly, connect the AC to DC adaptor, connect the DC connector to the switcher
first and then plug the adaptor into a functional AC outlet.
Output -
: Switch 4x VGA sources to # 2 Monitor Display
2
Output -
: Switch 4x VGA sources to # 3 Monitor Display
3
Output - : Switch 4x VGA sources to # 4 Monitor Display
4
Input -1 : VGA+Audio Signal source device # 1
Input -2 : VGA+Audio Signal source device # 2
Input -3 : VGA+Audio Signal source device # 3
Input -4 : VGA+Audio Signal source device # 4
Input -5 : VGA+Audio Signal source device # 5
Input -6 : VGA+Audio Signal source device # 6
Input -7 : VGA+Audio Signal source device # 7
Input -8 : VGA+Audio Signal source device # 8
2
3
2
HOW TO SETUP IR CODES :
POWER ON : 00FF 06F9
POWER OFF : 00FF 07F8
OUTPUT#1 / INPUT#1 : 0AF5 01FE
OUTPUT#1 / INPUT#2 : 0AF5 02FD
OUTPUT#1 / INPUT#3 : 0AF5 03FC
OUTPUT#1 / INPUT#4 : 0AF5 04FB
OUTPUT#1 / INPUT#5 : 0AF5 05FA
OUTPUT#1 / INPUT#6 : 0AF5 06F9
OUTPUT#1 / INPUT#7 : 0AF5 07F8
OUTPUT#1 / INPUT#8 : 0AF5 08F7
OUTPUT#2 / INPUT#1 : 0BF4 01FE
OUTPUT#2 / INPUT#2 : 0BF4 02FD
OUTPUT#2 / INPUT#3 : 0BF4 03FC
OUTPUT#2 / INPUT#4 : 0BF4 04FB
OUTPUT#2 / INPUT#5 : 0BF4 05FA
OUTPUT#2 / INPUT#6 : 0BF4 06F9
OUTPUT#2 / INPUT#7 : 0BF4 07F8
OUTPUT#2 / INPUT#8 : 0BF4 08F7
OUTPUT#3 / INPUT#1 : 0CF3 01FE
OUTPUT#3 / INPUT#2 : 0CF3 02FD
OUTPUT#3 / INPUT#3 : 0CF3 03FC
OUTPUT#3 / INPUT#4 : 0CF3 04FB
OUTPUT#3 / INPUT#5 : 0CF3 05FA
OUTPUT#3 / INPUT#6 : 0CF3 06F9
OUTPUT#3 / INPUT#7 : 0CF3 07F8
OUTPUT#3 / INPUT#8 : 0CF3 08F7
OUTPUT#4 / INPUT#1 : 0DF2 01FE
OUTPUT#4 / INPUT#2 : 0DF2 02FD
OUTPUT#4 / INPUT#3 : 0DF2 03FC
OUTPUT#4 / INPUT#4 : 0DF2 04FB
OUTPUT#4 / INPUT#5 : 0DF2 05FA
OUTPUT#4 / INPUT#6 : 0DF2 06F9
OUTPUT#4 / INPUT#7 : 0DF2 07F8
OUTPUT#4 / INPUT#8 : 0DF2 08F7