BACK PANEL
BACK PANEL
6
1. DC POWER INLET:
The Switcher is fi tted with a DC power plug-park input connector.
Please ensure that the plug-park used is of an approved type and
is of suffi cient current carrying capacity with the correct voltage
and connector polarity. 12Volt DC power supply 2A Max.
2. IR EXTERNAL IN: (EXT. IR TO CONTROL SWITCHER)
Support one of IR Extender to control Switcher Extend distance
maximum 300 M / ~1000 ft. When you plug the External IR extender
into the switcher, the front panel IR receiver remain active.
3. RS-232 CONNECTION:
RS-232 control port to allow for interfacing to a PC, Such as a
computer or touch panel control, to the switcher via this DB-9pin
Female connector for serial RS-232 control.
4. INPUTS - 1~4 VGA-RGBHV-AUDIO PORTS:
Connect a signal 4x sources of VGA (RGBHV) & Stereo Audio
player device to 4x VGA/Audio outputs matrix switcher.
5. OUTPUTS - 1~4 VGA-RGBHV-AUDIO PORTS:
Connect 4x VGA(RGBHV) & Stereo Audio via 4x VGA cable to
VGA Monitor displays and Audio speaker devices.
Power Jack:
DC Jack - Inner OD Ø 2.1 mm (+)
Outside OD Ø 5.5mm (GND)
Power input -12VDC, 2A
IR Extender Jack:
Female Jack
Remote port :
DB-9pin Female connector
VGA-Audio Via :
1x HD-15p connector, 1x TB Jack.
Note: With 1x female D-Sub HD-15F connector.
1x Female Terminal Block - 5 pin
VGA-Audio Via :
1x HD-15p connector, 1x TB Jack.
Note: With 1x female D-Sub HD-15F connector.
1x Female Terminal Block - 5 pin