Shinybow USA 8x2 MultiVideo To VGA Switcher Series, Instruction Manual, Page: 6 / 19

1
MULTIVIDEO SWITCHER
SW-3866
POWER
2
3
4
5
6
7
8
Menu
Exit
ENTER ENTER
1280x1024
1366x768
1680x1050
1920x1200
Audio Volume
PAGE 6
SB-3866 INSTRUCTION & OPERATION MANUAL
Before making any connections to the SB-3866. Observe the following:
> Ensure the mains voltage supply matches the label on the supplied plug-
Pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a common point.
> Avoid powering equipment within a system from multiple power sources
that may be separated by large distances
REMOTE CONTROL
REMOTE CONTROL
> Connect all audio video sources and destination equipment
> power up all source and destination audio-visual sources
> For each destination output select the appropriate input source by using
> Upon power up the switcher will return to its last used setting before
The front panel input select buttons. The supplied IR remote control.
Or through the RS 232 serial communications port.
Powered down.
1
2
SWITCH POWER ON or OFF 1
Controller with a power ON and OFF
SELECT VGA OUTPUT RESOLUTIONS
Select VGA output resolutions as following :
- SXGA 1280 x1024
- WXGA 1366 x 768
- WSXGA+1680 x1050
- WUXGA 1920 x1200
3
MEMU - OSD
OSD to setup or Adjust output resolutions and color.
4
AUDIO VALUE ADJUSTMENT
OSD to setup or Adjust Audio output Volume
6
INPUT 1 To 8 SOURCES SELECT
The Input 1 to 8 Audio and Video source selections
2
4
3
6
5
EXIT - OSD
OSD to EXIT
5
Input- # 1 Composite Video / Stereo Audio
In put- # 2 Composite Video / Stereo Audio
In put- # 3 S-Video / Stereo Audio
In put- # 4 S-Video / Stereo Audio
In put- # 5 Component Video (YP
B
P
R
) / Stereo Audio
In put- # 6 Component Video (YP
B
P
R
) / Stereo Audio
In put- # 7 VGA-RGBHV / Stereo Audio
In put- # 8 VGA-RGBHV / Stereo Audio