4
Setup Instructions:
Turn on Computer
1.
Plug Shintaro Wireless Multimedia RF receiver into a vacant USB port on
2.
your computer
Open battery cover located on the underside of the Wireless Multimedia
3.
Keyboard and place four AA batteries inside the battery compartment.
Carefully close the compartment cover
Configuring Wireless ID Signal
4.
a) Press circular ID button on the RF receiver (Picture A ).
b) Next push the grey ID button located on the top left of the Wireless
Multimedia keyboard. When the green LED is flashing the Wireless
Multimedia Keyboard and RF receiver are establishing a wireless
connection. This may take a few seconds. The green LED situated on the
RF receiver will stop flashing once a wireless connection is established
L E D
LED
ID
Picture A
Picture B