Shintaro SHWKBM, User Manual

Page: 7 / 10

7
Setup the Connection between the Receiver and the Mouse, Keyboard.
Plug the RF receiver into the USB port of your computer. 1.
Insert the batteries into the mouse and keyboard, then follow the steps 2.
below.
If the mouse or the keyboard is not working, please put them into pair
3.
mode.
Pairing: Re-plug the receiver into the USB port of your computer, then
4.
press connect button of the mouse and keyboard. If the mouse or
keyboard do not work after 10 seconds, pair them again. (The receiver
has auto pairing function).
The LED indicator on receiver flashes when the mouse is moving or
5.
when the keyboard is in use.
When the battery of the keyboard is low, the Low Power indicator will
6.
blink.