HARDWARE INSTALLATION
Remove the 3.5 inch drive bay’s cover at the front of PC
1.
case. (Refer to your computer hardware manual for
instructions on removing the cover).
Place Shintaro USB 3.0 4-port internal hub with cables
2.
into the drive bay.
Mount the internal 4-port hub firmly on both tracks of the
3.
drive bay using the four screws provided.
Connect the USB 3.0 cable from USB 3.0 Internal 4-port
4.
hub to USB 3.0 port on the computer.
Note: If your
computer’s USB 3.0 Port is located outside the chassis,
please remove the bracket first.
Connect the Molex Power male connector on the
5.
USB3.0 Internal 4-port hub onto the Molex Power female
connector on he power supply unit of your chassis
Turn on your computer and the USB 3.0 Internal
6.
4-port hub should function properly.
PRODUCT SPECIFICATIONS
Interface to PC
One USB 3.0 Micro-B upstream port(M/B)
Four USB 3.0 Type A downstream ports(PC)
Front Panel I/O
USB 3.0 Port x 4
Indicator
Power on(Green)/each port
Power Input
USB Bus Power and extra power from
system power
System
Environments
Operating Temperature: 5°C ~ 40°C
Operating Humidity: 20%RH ~ 80%RH
Certification
FCC Class B, CE
System Sup-
port
Win XP, Win Vista 32/64, Win 7 32/64
Linux Kernel ( USB 2.0 only )
*This specification may be revised without notice.
Summary of Contents for Blazer 4
Page 1: ......