7
4. To connect your turntable to your sound system, plug in the two RCA cables to the RCA
outputs on the rear of the turntable to the
RCA line level inputs
of your stereo receiver or
active speakers. Before connecting power to your turntable, please ensure you have read and
understood the safet y precautions. Connect the power cord to the power module on the rear of
the turntable and plug into a grounded wall outlet. To limit the potential for inter ference, avoid
using outlets on the same circuit as dimmer switches. Put the belt around the motor pulley and
plat ter, spin the plat ter by hand and the belt will self-level.
5. Each step of the grooved pulley is precision-machined to provide exact speeds for 33 1/3 and
45 RPM operation (Figure 3). For 33 1/3 RPM operation, place the belt in the upper slimmer groove
of the pulley. For 45 RPM operation, place the belt in the lower wider groove of the pulley.
4 5 R P M
Figure 3
3 3 R P M