To Attach The Hand Crack:
1. Insert the mounting hole of the Hand Crank (part# 1) onto the Shaft (part# 21).
Then secure the Hand Crank to the Shaft, using one Nut (part# 24).
(See Figure
E).
OPERATING INSTRUCTIONS
To Use The Winch Manually:
1.
WARNING: Do not use the Hank Crank (part# 1) to assist a powered Winch.
This will damage the Winch, and may cause personal injury. (See Figure E).
2. Place the vehicle’s transmission in “Park.”Turn off the engine. Set the emergency
brake, and block the wheels from rolling, using suitable chocks (not included.)
3. To operate the Hand Crank (part# 1), turn the Clutch Knob clockwise until hand
tight. Do not force it or overtighten. (See Figure E.)
4. Rotate the Hand Crank (part# 1) clockwise to tighten the Steel Cable. Continue
turning the Hand Crank clockwise until the Steel Cable has been completely
retracted. (See Figure E.)
HAND CRANK (#1)
FIGURE E
SHAFT (#21)
NUT (#24)
STEEL CABLE
8
