ShinMaywa NORUS CR series, Instruction Manual, Page: 11 / 24

11
4 Installation
Examples of installation
Fig.1 An example of the guide rail system type Fig. 2 An example of the 2” NPT flange type
Guide Rail System Type
Fig3.
Illustration of caption2&3
1. Attach the Guide Holder and the Connection, taking the positions of the pump and its piping into
consideration.
2. Install a Guide Pipe. (A Guide Pipe is not included in the accessories.) (See Fig3)
Guide Pipe should be 1 ” schedule 40 PVC.
If the pipe length is over 4' in height, Intermediate Guide Holder should be installed.
Otherwise, Guide Pipe may remove from Connection when the pump is being pulled out of the Tank.
3. Detach the companion flange from the pump, attach the flange packing to the Connection, and connect
the pipe to the Connection using the companion flange. (See Fig3)
4. Attach the flange packing to the pump, and attach the slide to the pump.
5. Attach the chain to the hole in the handle of the pump. (See the manual included with the guide rail
system type pump.)
6. Pass the Guide Pipe along the groove in the slide, and lower the pump into position using the chain.
7. When the slide reaches the Connection, the pump is connected automatically and its installation is
completed.