Shinko PCD-33A Instruction Manual Download Page 18 | Manualshive

Page: 18 / 64

background image

18

(12)

Alarm 1 (A1) action selection

Selects Alarm 1 (A1) action type, referring to 8.5 Alarm 1 (A1) action (pp.48, 49).
• Selecting item:

No alarm action

High limit alarm

Low limit alarm

High and Low limits alarm

High and Low limit range alarm

Process High alarm

Process Low alarm

High limit alarm with standby

Low limit alarm with standby

High and Low limits alarm with standby

• Default value:

No alarm action

(13)

Alarm 2 (A2) action selection

Selects Alarm 2 (A2) action type, referring to 8.5 Alarm 2 (A2) action (pp.48, 49).
The selecting item and default value are the same as those of Alarm 1 (A1) action
selection.
Not available if P24 (option) is added.

(14)

Alarm 1 (A1) Energized/Deenergized selection

Selects Alarm 1 (A1) Energized/Deenergized.
Not available if No alarm action is selected in Alarm 1 (A1) action selection
• Selecting item:

Energized

Deenergized

• Default value:

Energized

(15)

Alarm 2 (A2) Energized/Deenergized selection

Selects Alarm 2 (A2) Energized/Deenergized.
Not available if No alarm action is selected in Alarm 2 (A2) action selection
The selecting item and default value are the same as those of Alarm 1 (A1) Energized/
Deenergized selection.

(16)

Alarm 1 (A1) hysteresis setting

Sets Alarm 1 (A1) hysteresis.
Not available if No alarm action is selected in Alarm 1 (A1) action selection
• Setting range: 0.1 to 100.0 ( )

For DC input, 1 to 1000 (The placement of the decimal point follows the selection.)

• Default value: 1.0

(17)

Alarm 2 (A2) hysteresis setting

Sets Alarm 2 (A2) hysteresis.
Not available if No alarm action is selected in Alarm 2 (A2) action selection
Not available if P24 (option) is added.
The setting range and default value are the same as those of Alarm 1 (A1) hysteresis
setting.

(18)

Alarm 1 (A1) action delayed timer setting

Sets Alarm 1 (A1) action delayed timer.
Not available if No alarm action is selected in Alarm 1 (A1) action selection
• Setting range: 0 to 9999 seconds
• Default value: 0 seconds

(19 )

Alarm 2 (A2) action delayed timer setting

Sets Alarm 2 (A2) action delayed timer.
Not available if No alarm action is selected in Alarm 2 (A2) action selection
Not available if P24 (option) is added.
The setting range and default value are the same as those of Alarm 1 (A1)

action

delayed timer setting.

«
...
16
17
18
19
20
...
»

Summary of Contents for PCD-33A

































































Reviews:

No comments

Related manuals for PCD-33A

Brand: ZKTeco Pages: 123

Brand: unicore Pages: 25

Brand: unicore Pages: 24

Brand: Mamas & Papas Pages: 16

Brand: 1Control Pages: 8

Brand: National Instruments Pages: 102

Brand: NAU ROBOTICS Pages: 109

Maschine Mikro MK2

Brand: Native Instruments Pages: 181

Brand: ZKTeco Pages: 11

Z1000 CIMR-ZU*A Series

Brand: YASKAWA Pages: 340

Brand: ETC Pages: 8

Brand: Texas Instruments Pages: 27

Brand: Leggett & Platt Pages: 20

MultiConnect Dragonfly MTQ-MNA1-B01

Brand: Multitech Pages: 45

Brand: Cypress Pages: 2

Brand: Dudley Pages: 8

PLATINUM PS-9003

Brand: HydroQuip Pages: 24

Brand: LAUNDRY SOLUTION Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands