7
Ａ
Ｃ
１
２
３
3. Terminal arrangement
Warning
Turn the power supply to the instrument OFF before wiring and checking.
Working on or touching the terminal with the power switched ON may result in severe
injury or death due to electric shock.
Caution
This instrument has no built-in power switch and fuse.
It is recommended that power switch or fuse be set at the external circuit near this
instrument.
Solderless terminal for the cabtyre cord
Use a solderless terminal (ring type) in which
an M4 screw fits as shown in (Fig. 3-1).
4. Operation and action
4.1 Operation
When mounting to the hopper and wiring are completed, check the action as follows.
(1) Turn the power supply to this instrument ON.
(2) Detector wing starts to revolve with no load.
Between terminals
1
and
2
:
Conductive
Between terminals
2
and
3
:
Open
(3) When the load is added to the detector wing, the wing stops rotating.
Between terminals
1
and
2
: Open
Between terminals
2
and
3
:
Conductive
Terminal code
Lead wire color
A
White
C
Orange
1
Black
2
Brown
3
Green
8
m
m
4.3mm
(Fig. 3-1)
Power supply
Load
