8
After the power is turned on, the sensor input characters and temperature unit are indicated on the PV
display, and the input range high limit value is indicated on the SV display for approximately 3 seconds.
See (Table 5-1).
(If any other value is set during the scaling high limit setting, the set value is indicated on the SV display)
During this time, all outputs and the LED indicators are in OFF status.
Control will then start indicating the PV (process variable) on the PV display, and SV (desired value) on
the SV display.
(Table 5-1)
Sensor input
PV display SV display
PV display
SV display
K
J
R
S
B
E
T
N
PL-
C (W/Re5-26)
Pt100
JPt100
4 to 20mA DC
0 to 20mA DC
0 to 1V DC
0 to 5V DC
1 to 5V DC
0 to 10V DC
Scaling high limit value
