12
10. DFT-700 sensor
11. DFT-700 sensor guarantee and liability limit
Since sensors for temperature or humidity measurement is consumable, it is not guaranteed.
Contact our shop or sale office if any flaw during manufacturing or malfunction due to the accident during
shipment.
Shinko Technos is not liable for any damages after using sensors.
• DFT-700 temperature sensor is used for temperature measurement.
Never use it except for the purpose of temperature measurement.
• Please adjust the DFT-700-M input to the sensor type.
• When sensor type does not match the input type, reliable measured value cannot be obtained
• Sensor type is written at the cord terminal e.g. “K, Pt100” along with high limit measuring
temperature.
• Reliable measured value cannot be obtained when temperature is measured where electricity
is running.
• Never use sensor for human body. (e.g. Taking temperature, etc.)
• Do not touch the sensor measuring part (metal section, etc) protection tube after
measuring the temperature of hot or cold objects, as this may cause burning or frostbite.
• Be sure to turn the power OFF of DFT-700-M, when DFT-700 thermo-hygro sensor (hereinafter
THD-700-P) is attached or detached from DFT-700-M.
• Do not attach or detach THD-700-P in wet place or with wet hands because it may cause
electric shock.
Warning
• The maximum temperature written in the table is the limit temperature of the measuring part.
Use such as grip, cord, etc in an ambient temperature (0 to 60
) except for the measuring part.
• When it is used in a high temperature atmosphere, which may cause breakdown or ignition.
• When measuring under -50
atmosphere, sensor elasticity deteriorates and sensor becomes
fragile.
• Do not use this in a place with electric noise such as high magnet field and high frequency,
or DFT-700-M and sensor may breakdown or be damaged.
• Do not use this in a place with corrosive atmosphere such as acid, alkali, etc, because
that may hasten the sensor degradation and be responsible for breakdowns.
• Do not cool down the measuring part quickly such as soaking in water after measuring.
That may cause breakdown.
• Do not drop sensor and THD-700-P, strike them with hard objects, press hard on them,
as this may lead to the breakdown or malfunction.
• Use THD-700-P within the proper conditions (temperature, humidity and atmosphere, etc.)
Caution