Shining Technology CitiDISK DV Quick Usage Guide v7.1 Shining Technology CitiDISK DV Quick Usage Guide v7.1
Turning On Internal Battery Before Usage
Charging the Internal Rechargeable Battery
Powering On/Off the CitiDISK DV
Power on
:
Toggle the
GREEN
button (closest to
the external power adapter input)
once. When the internal battery
power has less than 5 minutes
remaining, this power status light
will start to blink and will stop
recording before shutting off the
unit.
Power off
:
Toggle the
GREEN
button again.
Turn on the battery
:
Use a sharp pencil tip to slide the switch to the
“white dot” position. Without doing so the
CitiDISK DV will not operate.
Turn off the battery
:
Use a sharp pencil tip to slide the switch to the
other position while in storage or in transit so
as not to drain the battery when it’s not in use.
Re-charging power is drawn from FireWire
bus power or external power adapter. A
minimum of 4 to 6 hours of charging time
is required.
BLUE
LED
indicates battery charging is in
progress. Once the battery is fully
charged, the
BLUE
LED will go off.
P12
P5
