Shining 3D Transcan-C User Manual Download

Page: 57 / 60

Shining 3D Transcan-C_User Manual_V1.4.2

Other Operations

Icon

Function

Instruction

Official Website

Open the official website of Shining 3D to learn about the
company’s products and information.

Facebook

Enter Shining 3D’s facebook to view product introduction and
other operations.

Support Platform

Enter Shining 3D’s support platform to view product introduction
and other operations.

User Experience

To help us improve the quality and user experience of device, we
hope to be allowed to collect usage experience information. This
information will not contain your personal information or
scanned data, and will not be accessible to any third party.

Factory Default

All settings can be restored to the initial settings, and the
software will automatically restart.

About

View related software release information, contact information,
etc.

Open help mode

Open the real-time help file.

Teamviewer

The quick access to remote assistance. Please send the ID and
password in the pop-up window to the technical supporters for
remote assistance.

Summary of Contents for Transcan-C





























































Search results

Summary of Contents for Transcan-C

Reviews:

Related manuals for Transcan-C

Brands by name

Popular brands

Shining 3D Transcan-C, User Manual

Search results

Summary of Contents for Transcan-C

Reviews:

Related manuals for Transcan-C

Brands by name

Popular brands