Shining 3D Transcan-C_User Manual_V1.4.2
23
5.
Scanning
5.1.
Preparation
To align data if geometry features are not sufficient, you need to stick markers or pieces of clay
on the surface of scanned objects to create extra “features”.
When you stick markers on the surface of the object, you need to follow the following rules:
Make sure sticking at least 4 markers in each frame (one scanning field of view). Control the
number of markers seen on the camera view.
Stick markers in a random, non-linear pattern (see example below). Four markers are required
for public area alignment.
Markers should be stuck on the flat surface area and keep the marker surface flat.
Use the markers provided with the device only. Other markers can result bad accuracy or not to
be seen.
Object with markers
Before scanning transparent, highly reflective and black objects, you should spray white powder
on the surface (see example above)
