AccuFab-L4D & L4K_User Manual_V3.2.20_June 2021
1
Foreword
General
The Manual introduces functions, installation, usage and maintenance of the printer (hereinafter referred to
as "the Printer").
Safety Instructions
Signal
Meaning
Additional information for particular situation.
Improper actions or conditions that may damage the product or injury, and
consequently void your warranty or service contract or lose the patient data or
system data.
The safety instructions that you must precisely follow to avoid injury. Failure to
observe can cause damages to your product, or result in personal injuries, or even
death.
Revision History
No.
Version
Revision Content
Release Date
1
V3.2.20
First release.
June, 2021
FCC Regulations
Please note that changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
⚫
Reorient or relocate the receiving antenna.
⚫
Increase the separation between the equipment and receiver.
⚫
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
⚫
Consult the dealer or an experienced radio/TV technician for help.
RF exposure statement
