Shini STM-PW series, User Manual

Page: 19 / 69

5-2
5. Installation
5.2 Mould and Water Couplings
Cooling wate inlet Cooling water outlet
Connect cooling water inlet with water
supply and cooling water outlet with a
drainage pipe. After that, turn on water
supply.
Unused mould couplings can be
connected with each other by a
teflon pipe, as shown in.
(Figure. 5.2-2)
2)
3
Figure. 5.2-1
Figure. 5.2-2
Figure. 5.2-3
1) It is necessary, while connecting
from the access to mould, to use
two spanners to fix the switching
connection and ball valve before
screw tightly the horn nut of the
connection pipe, otherwise water
might leaks from the machine.
(Figure.5.2-1)
Note! Cooling water inlet and outlet
as shown by the Figure. 5.2-3.
Please do not connect reversely.
Please connect the coolng water
outlet with high temperature
resistant pipe when temperature is
above 100
.