In cable diagnosis test main menu, press “set” button to change the testing parameter.
It includes:
Speed test time: setting each of the six speed test catalogue time. (Default value 5 seconds)
Twisted pair cable type: cat5e or cat6.
Remote setting:
Remote
setting
Cable diagnosis
No demands. NCT-500 could not display cable length when connecting to the
working network equipment. Cable length will display when cable is “open”
or “short”.
Speed test
Need to connect to RT-80 data reflector.
Impendence test
Need to connect to RT-80 data reflector and RT-80 do not need to turn on.
Hint: NCT-500 could not display cable length when connecting to the working network equipment. If need
the cable length in test report, you must take three tests individually (during the cable diagnosis, data
reflector must disconnected). After three test completed, press “Save” button to save the test results.
Network Test
Network test include Port, PoE, Device discovery and Internet four programs. (Use the
Left
port)
Port
The test is used for testing switch port’s speed, line sequence and pair’s polarity.
