background image

2

The Shindaiwa H4 series of hand-held power equipment is designed and built to deliver superior performance and 

reliability without compromise to quality, comfort, safety or durability. Shindaiwa engines represent the leading edge of high-

performance engine technology, delivering exceptionally high power with remarkably low displacement and weight. As an 

owner/operator, you’ll soon discover for yourself why Shindaiwa is simply in a class by itself!

Introduction

Throughout this manual are special “attention statements”.

Attention Statements

WARNING!

A statement preceded by the triangular 

attention symbol and the word “WARNING” contains 

information that should be acted upon to prevent 

serious bodily injury.

CAUTION!

A statement preceded by the word “CAUTION” 

contains information that should be acted upon to 

prevent mechanical damage.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is 

one that possesses special significance.

NOTE:

A statement preceded by the word “NOTE” contains 

information that is handy to know and may make your job 

easier.

 

DANGER!

A statement preceded by the triangular 

attention symbol and the word “DANGER” contains 

information that should be acted upon to prevent 

serious injury or death.

ECHO, Inc. reserves the right to make changes to products without prior notice, and without obligation to make alterations to 

units previously manufactured.

IMPORTANT!

The information contained in these instructions describes units available at the time of publication.

Contents

PAGE

PAGE

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from this unit as well as to protect 

you and others from harm. These procedures are guidelines for safe operation under most conditions, and are not intended to 

replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your H4 series hand-held 

power equipment, or if you do not understand something in this manual, contact Shindaiwa at the address printed on the back of 

this Manual.

WARNING!

The engine exhaust from this product contains chemicals known to the State of California to cause cancer,    

 

birth defects, or other reproductive harm.

Safety ................................................... 3

Product Description .............................. 5

Specifications

 ....................................... 6

Emission Control .................................. 6

Assembly .............................................. 6

Mixing fuel ............................................ 8

Filling the fuel tank................................ 9

Starting the Engine  ............................ 10

Stopping the Engine ............................11

Checking Unit Condition ..................... 12

Operation ............................................ 12

Maintenance ....................................... 13

Long Term Storage ............................. 19

Troubleshooting Guide ....................... 20

Warranty  ............................................ 23

Servicing Information .......................... 28

Summary of Contents for T254





























Reviews: