OPERATION
RS600
8
X7507840102
© 7/21 ECHO Incorporated
OPERATION
Application Instructions
TIP HAZARD. Unit can tip on uneven ground. Always fill hopper
on flat ground, and keep bystanders away. Otherwise personal
injury can result.
1.
Fill Hopper
Release actuator handle (A) to
close gate. Fill hopper.
Note: Fill hopper in an area that
won’t be damaged by
spilled product.
2.
Set Gate Adjustment
Push gate adjuster (B) down and
move to best application setting
(see chart below). Pull adjuster
upward to lock in place.
Note: Gate adjustment settings
should only be used as a
general guideline for
application. Refer to
instructions on material
you are spreading for most accurate application setting
requirements.
3.
Application
A. Lower edge guard (C) and
make perimeter pass to protect
non-lawn areas. Pull actuator
handle to open gate while
spreading.
B. Raise edge guard. Make
parallel internal passes to ensure
even coverage.
A
B
C
C
