MAINTENANCE
T262
28
X7502342100
© 4/2017 ECHO Inc.
1.
Use a clean rag to remove loose
dirt from around fuel cap and
empty fuel tank.
2.
Pull the fuel filter from the fuel
tank.
Do not damage fuel line while
removing fuel filter from tank.
3.
Remove the filter from the line and
install the new filter.
Note: Federal EPA regulations require all model year 2012 and later
gasoline powered engines produced for sale in the United
States to be equipped with a special low permeation fuel
supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel
supply hoses certified by EPA can be used to replace the
original equipment supply hose. Fines up to $37,500 may be
enforced for using an un-certified replacement part.
Spark Plug
Level 2.
Use only NGK CMR7H spark plug otherwise severe engine damage
may occur.
1.
Remove spark plug and
check for fouling, worn and
rounded center electrode.
2.
Clean the plug or replace
with a new one. DO NOT
sand blast to clean.
Remaining sand will
damage engine.
3.
Adjust spark plug gap by
bending outer electrode.
4.
Tighten spark plug to 102-153 kgf•cm (89-133 in•lbf).
Parts Required:
Tune-Up Kit
0.65 mm (0.026 in.)
