Shindaiwa HT320S, Operator'S Manual

Page: 15 / 116

13
Description
Description
1. Spark plug
2. Silencer cover Cover for the silencer to prevent opera-
tor contact with hot exhaust.
3. Carburettor Device for mixing fuel and air in the correct
proportions.
4. Starter handle Pull handle to start the engine.
5. Throttle trigger lockout Device that prevents the acci-
dental operation of the throttle trigger until manually re-
leased.
6. Ignition switch Device for allowing the engine to be
started and stopped.
7. Throttle trigger Device activated by the operator's fin-
ger, for controlling the engine speed.
8. Rear handle Handle located furthest from the cutting
device.
9. Fuel tank cap For closing the fuel tank.
10. Fuel tank Contains fuel and fuel filter.
11. Air cleaner cover Covers air filter.
12. Gear housing Housing to support the gears that reduce
the speed of engine to cutting attachment.
13. Front handle Handle located on the cutting device.
14. Guard Guard between the front handle and cutting de-
vice for protecting the hand from injuries if the hand slips
off the handle.
15. Cutting device That part of the assembly of cutter
blade and shear plate together with any supporting part,
which performs the cutting action.
16. Leaf collector plate Keeps cut leaves or twigs from
scattering.
17. Blade cover When transporting or storing the product
always fit the blade cover.
18. Type and serial number