Shindaiwa EB6000, Instruction Manual

Page: 17 / 36

EB6000 ASSEMBLY
X7508210001
17
© 01/2016 ECHO Inc.
Battery Installation
The blower will operate when the battery is installed, the
power indicator LED is lit, and the throttle trigger or cruise
control are engaged. Make sure the blower is properly
positioned to prevent loss of control and possible serious
injury.
Note: The battery comes partially charged from the factory and
needs to be fully charged before first use.
1. Make sure power to unit is turned off.
Note: Unit may be shipped with battery attached to blower with
battery spacer. Remove screw (D), and remove battery
spacer (E) for initial battery installation.
2. Align ridges (A) on battery pack with grooves in blower. Slide
battery pack into blower.
Assure the battery pack latch (B) snaps into place and battery pack is secure before beginning operation.
3. To remove battery, depress battery pack latch release (C) slide battery pack out of blower.