background image

22

SHINDAIWA LIMITED WARRANTY STATEMENT FOR 

PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010

ECHO, INC'S RESPONSIBILITY

ECHO Incorporated’s (ECHO, INC.) Limited Warranty, provides to the original purchaser that this Shindaiwa product is free from defects 

in material and workmanship.  Under normal use and maintenance from date of purchase, ECHO, INC. agrees to repair or replace at it’s 

discretion, any defective product free of charge at any authorized Shindaiwa servicing dealer within listed below application time periods, 

limitations and exclusions.

 THIS LIMITED WARRANTY IS ONLY APPLICABLE TO SHINDAIWA PRODUCTS SOLD BY AUTHORIZED 

SHINDAIWA DEALERS. IT IS EXTENDED TO THE ORIGINAL PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT 

OWNERS EXCEPT FOR EMISSION RELATED PARTS.

 Repair parts and accessories replaced under this warranty are warranted only 

for the balance of the original unit or accessory warranty period. Any damage caused by improper installation or improper maintenance 

is not covered by this warranty. All parts or products replaced under warranty become the property of ECHO, INC. This warranty is 

separate from the Emission control warranty statement supplied with your new product. Please consult the Emission Control Warranty 

Statement for details regarding emission related parts. For a list of Authorized Shindaiwa Dealers refer to WWW.SHINDAIWA.COM or 

call 

1-877-986-7783. 

OWNER’S RESPONSIBILITY

To ensure trouble free warranty coverage it is important that you register your Shindaiwa equipment on-line at WWW.SHINDAIWA.

COM

 or by filling out the warranty registration card supplied with your unit. Registering your product confirms your warranty coverage 

and provides a direct link if we find it necessary to contact you.

The owner shall demonstrate reasonable care and use, and follow preventative maintenance, storage, fuel and oil usage as prescribed in 

the operator’s manual. Should a product difficulty occur, you must, at your expense, deliver or ship your Shindaiwa unit to an authorized 

Shindaiwa servicing dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return of your unit 

after the repairs have been made.  For your nearest authorized Shindaiwa servicing dealer, call Shindaiwa’s Dealer Referral Center, at 

1-877-986-7783 or you can locate a Shindaiwa servicing dealer at WWW.SHINDAIWA.COM. Should you require assistance or have 

questions concerning Shindaiwa’s Warranty Statement, you can contact our Consumer Product Support Department at 1-800-673-1558 

or contact us through the web at WWW.SHINDAIWA.COM

.

 

PRODUCT WARRANTY PERIOD

RESIDENTIAL APPLICATION 

• 

 

2 YEAR WARRANTY - 

Units for residential, or non-income producing use will be covered by this limited warranty for 

two

 

(2) years

 

from date of purchase. 

EXCEPTIONS: 

 

For engine powered products, the electronic ignition module, flexible drive cable, and solid drive shaft are warranted for the 

life*

 of the product on parts only.

 

Cutting attachments such as, but not limited to, bars, chains, sprockets, tines, blades, Power Broom

TM

, belts, and nylon trimmer 

heads for residential or non-income producing use will be covered for failures due to defects in material or workmanship for a 

period of 

60 days

 from original product purchase date. Any misuse from contact with concrete, rocks, or other structures is not 

covered by this warranty.

 

 

Multipurpose Tool Attachments carry the same warranty duration as the units they are designed to fit.

 

COMMERCIAL APPLICATION  

• 

 

90 DAY WARRANTY - 

All Chain Saws and Cut-Off Saws for commercial, institutional, agricultural, industrial, or income producing use will be 

covered by this limited warranty for 

90 Days 

from the date of purchase.

• 

 

2 YEAR WARRANTY - 

Units for commercial, institutional, agricultural, industrial, or income producing use will be covered by this 

limited warranty for two 

(2) years

 from the date of purchase. 

EXCEPTIONS: 

 

For engine powered products, the electronic ignition module, flexible drive cables, and solid drive shafts are warranted for the 

life*

 of the product on parts only. 

 

Cutting attachments such as, but not limited to, bars, chains, sprockets, tines, blades, Power Broom

TM

, belts, and nylon trimmer 

heads for commercial, institutional, agricultural, industrial, rental, or income producing will be covered for failures due to defects 

in material or workmanship for a period of 

30 days

 from original product purchase date. Any misuse from contact with concrete, 

rocks, or other structures is not covered by this warranty.

 

 

Multipurpose Tool Attachments carry the same warranty duration as the units they are designed to fit.

RENTAL APPLICATION - 90 DAYS WARRANTY

•    Units  for  rental  use  will  be  covered  against  defects  in  material  and  workmanship  for  a  period  of  90  days  from  the  date  of     

purchase. 

*

  

ECHO INC’s liability under the “Lifetime” coverage is limited to furnishing parts specified under the 

PRODUCT WARRANTy PERIOD 

section of this warranty statement for 

“Life”

 free of charge for a period of ten (10) years after the date of the complete unit’s final 

production. 

Summary of Contents for DH254





























Reviews: