20
Maintenance and care
Cleaning silencer
1.
Carbon deposits in silencer and exhaust guide will cause a
drop in engine output and overheating. Clean deposits from
silencer and exhaust guide.
2.
Tighten two bolts.
Check fuel system
Check before every use.
After refuelling, make sure fuel does not leak or exude from
around fuel pipe, fuel grommet or fuel tank cap.
In case of fuel leakage or exudation there is a danger of fire.
Stop using the machine immediately and request your dealer
to inspect or replace.
Check spark plug
Check plug gap. Correct gap is 0.6 mm to 0.7 mm.
Inspect electrode for wear.
Inspect insulator for oil or other deposits.
Replace plug if needed and tighten to 15 N•m - 17 N•m (150
kgf•cm to 170 kgf•cm).
1. Two bolts
2. Silencer
3. Exhaust guide
1. Fuel tank cap
a: 0.6 - 0.7 mm
Summary of Contents for DH2200ST
