Shindaiwa C344 Owner'S/Operator'S Manual Download Page 3

3

ALWAYS 

inspect unit before each 

use. Replace any damaged parts.

NEVER

 run the engine when 

transporting the unit.

NEVER

 run the engine indoors! Make 

sure there is always good ventilation. 

Fumes from engine exhaust can 

cause serious injury or death.

ALWAYS

 stop the unit immediately 

if it suddenly begins to vibrate or 

shake. Inspect for broken, missing 

or improperly installed parts or 

attachments.

NEVER

 extend trimming line beyond 

the length specified for your unit.

ALWAYS

 keep the unit as clean 

as practical. Keep it free of loose 

vegetation, mud, etc.

ALWAYS

 hold the unit firmly with both 

hands when cutting or trimming, and 

maintain control at all times.

ALWAYS

 use the proper cutting tool 

for the job.

ALWAYS

 keep the handles clean.

ALWAYS

 disconnect the spark 

plug wire before performing any 

maintenance work.

ALWAYS

, if a saw blade should 

bind fast in a cut, shut off the engine 

immediately. Push the branch or tree 

to ease the bind and free the blade.

Work Safely

Trimmers  and brushcutters operate at 

very high speeds and can do serious 

damage or injury if they are misused or 

abused. 

Never allow a person without 

training or instruction to operate this 

unit!

Stay Alert

You must be physically and mentally fit 

to operate this unit safely.

Safety

WARNING!

Never make unauthorized 

attachment installations.

WARNING!

Never operate 

power equipment of 

any kind if you are tired or if you 

are under the influence of alcohol, 

drugs, medication or any other 

substance that could affect your 

ability or judgement.

WARNING!

Use Good Judgment

Safety Labels

IMPORTANT!

Safety and Operation Information Labels: Make sure 

all information labels are undamaged and readable. 

Immediately replace damaged or missing information 

labels. New labels are available from your local 

authorized Shindaiwa dealer.

This label indicates the minimum distance between 

front handle and rear grip per ANSI B175.3.

WARNING!

The ignition components of this machine generate an electromagnetic field during operation which may interfere 

with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their 

physician and the pacemaker manufacturer before operating this machine. In the absence of such information, ECHO 

does not recommend the use of ECHO products by anyone who has a pacemaker.

Summary of Contents for C344

































Reviews: