Shindaiwa B410TS, Operator'S Manual

Page: 21 / 124

19
Maintenance and care
Maintenance and care
Servicing guidelines
Maintenance and care
Cleaning air filter
1. Close choke. Loosen screw and remove air cleaner cover
(A).
2. Remove air filter (B) (air filter is located inside air cleaner
cover).
3. Brush dirt from filter or clean with compressed air.
4. Reinstall
filter.
5. Reinstall cover and tighten screw.
WARNING
Observe the following precautions when checking and maintaining your product after use:
 
Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.

Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
IMPORTANT

Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
Area Maintenance Page Before use Monthly
Air filter Clean/Replace 19 •
Fuel filter Inspect/Clean/Replace 20 •
Spark plug Inspect/Clean/Adjust/Replace 21 •
Carburettor Adjust/Replace and adjust 20 •
Cooling system Inspect/Clean 20 •
Silencer Inspect/Tighten 21 •
Silencer Clean 21 •**
Drive shaft Grease 21 •**
Angle transmission Grease 22 •*
Starter Inspect - •
Cut off knife Inspect/Clean - •
Fuel system Inspect 20 •
Screws, bolts and nuts Inspect, Tighten/Replace - •
* Or 50 hours, whichever occurs first. ** Or 100 hours, whichever occurs first.
IMPORTANT

Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.
If you have any questions or problems, please contact your dealer.