manualshive.com logo in svg

Shindaiwa AHS242, Owner'S/Operator'S Manual

Share
Download
Shindaiwa AHS242 Owner'S/Operator'S Manual Download Page 19

19

Lubricate cutter assembly and gearcase

Gearcase 

grease fitting

B

CAUTION!

Do not remove the D-shaped shim 

washer from the gearcase clamp! 

The shim washer prevents damage 

from overtightening the tube clamp 

bolt.

3.  Slide the gearcase out of the tube. 

Using a grease gun, pump lithium-

base grease (about 10 grams) 

into the grease fitting (B) on the 

gearcase until you see old grease 

being purged from the gearcase. 

Purged grease will be visible in the 

outer tube cavity. 

4.  Clean up excess grease, then reassemble the 

gearcase onto the outer tube. Make sure the index 

bolt fits into the hole on the outer tube. Securely 

tighten both bolts.

Maintenance 

(continued)

135 Hour Maintenance

WARNING!

Never operate the unit with 

a damaged or missing muffler or 

spark arrester! Operating with a 

missing or damaged spark arrester 

is a fire hazard and could also dam

-

age your hearing.

Engine Cover 

Screws

Muffler Cover

Engine Cover

Muffler 

Cover 

Screw

Spark arrester 

screen

Spark arrester 

cover

Outlet

Muffler 

gasket

Muffler 

Gasket

Muffler 

screws

Muffler and spark arrester maintenance

If the engine becomes sluggish and 

low on power, check and clean the 

spark arrester screen.

6.  Inspect the cylinder exhaust port for 

any carbon buildup.

7. 

 Gently tap the muffler on a wood 

surface to dislodge any loose car-

bon.

8.  Reassemble the spark arrester, muf-

fler and engine cover in the reverse 

order of disassembly.

1.  Remove the spark plug boot.
2.  Remove the engine cover and muf-

fler cover.

3.  Remove the spark arrester screen 

and cover.

4.  Clean the screen with a stiff bristle 

brush.

5. 

Remove the muffler.

Screws

Summary of Contents for AHS242





























Reviews:

No comments

Brands by name

Popular brands

Load more brands