Shindaiwa AH254, Owner'S/Operator'S Manual

Page: 11 / 32

11
■
NEVER smoke or light fires near
the engine.
■
ALWAYS stop the engine and
allow it to cool before refueling.
■
ALWAYS
Wipe all spilled fuel and
move at least 3 meters (10 feet)
from the fueling point and source
before starting.
■
NEVER place flammable material
close to the engine muffler.
■
NEVER operate the engine without
the muffler and spark arrester
screen in place and in good working
condition.
■
FUEL IS HIGHLY FLAMMABLE.
■
ALWAYS store gasoline in a
container approved for flammable
liquids.
■
ALWAYS inspect the unit for fuel
leaks before each use. During
each refill, check that no fuel leaks
from around the fuel cap and/or
fuel tank.
If fuel leaks are evident, stop using
the unit immediately. Fuel leaks
must be repaired before using the
unit.
■
ALWAYS move the unit at least
3 meters (10 feet) away from a
fuel storage area or other readily
flammable materials before
starting the engine.
Filling the fuel tank
1. Place the unit on a flat, level
surface.
2. Clear any dirt or other debris from
around the fuel filler cap.
3. Remove the fuel cap, and fill the
tank with clean, fresh fuel.
4. Reinstall the fuel filler cap and
tighten firmly.
5. Wipe away any spilled fuel before
starting engine.
CAUTION!
Slowly remove the fuel cap only
after stopping the engine
WARNING!
Minimize the Risk of Fire
Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off
containers to reduce fuel spillage.
After use
• DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage contain-
er.
Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a
precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, away from
sparks and flames.
IMPORTANT!
Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.
Mixing Instructions
1. Fill an approved fuel container with half of the required amount of gasoline.
2. Add the proper amount of engine oil to gasoline.
3. Close container and shake to mix oil with gasoline.
4. Add remaining gasoline, close fuel container, and remix.
IMPORTANT!