background image

56

Symptom

Cause / Possibility

Remedy

Pedaling is stiff.

Are the tires inflated to a sufficient pressure?

Use a pump to add air.

Is the assist mode set to [OFF]?

Set the assist mode to [HIGH]. If you still do 
not feel that assistance is being given, 
contact the place of purchase. 

The battery may be running low.

After charging the battery well, check the 
level of assistance again. If you still do not 
feel that assistance is being given, contact 
the place of purchase.

Did you turn on the power with your foot 
placed on the pedal?

Turn on the power again without putting 
pressure on the pedal. If you still do not 
feel that assistance is being given, contact 
the place of purchase.

Battery

Symptom

Cause / Possibility

Remedy

All the five battery level 
indicators stay on.

The firmware version of the drive unit may 
be out-of-date.

Consult the place of purchase and check 
the firmware version.

The battery quickly loses its 
charge. 

The battery may be at the end of its service 
life. 

Replace the battery with a new one. 

The battery cannot be 
recharged. 

Is the power plug of the charger securely 
inserted into the electrical outlet?

Disconnect and then reconnect the power 
plug of the charger, and then repeat the 
recharging operation.
If the battery still cannot be recharged, 
contact the place of purchase. 

Is the recharging plug of the charger 
securely inserted into the battery?

Disconnect and then reconnect the 
recharging plug of the charger, and then 
repeat the recharging operation. 
If the battery still cannot be recharged, 
contact the place of purchase.

Is the charging adapter securely connected 
to the charging plug, or to the battery 
charging port?

Securely connect the charging adapter to 
the charging plug or to the battery 
charging port, and charge again. If the 
battery still does not charge, consult a 
dealer.

Is the connecting terminal for the battery 
charger, charging adapter, or battery dirty?

Wipe the connection terminals with a dry 
cloth to clean them, and then repeat the 
recharging operation.
If the battery still cannot be recharged, 
contact the place of purchase. 

The battery does not start 
recharging when the 
charger is connected. 

The battery may be at the end of its service 
life. 

Replace the battery with a new one.

The battery and charger are 
becoming hot.

The temperature of the battery or charger 
may exceed the operating temperature 
range.

Stop recharging, wait for a while and then 
recharge again. If the battery is too hot to 
touch, it may indicate a problem with the 
battery. Contact the place of purchase.

Summary of Contents for Steps BT-E6000































































Reviews: